Design Tips

La Lunar Printing Inc – Professional Design Tips

These tips will help you avoid common printing issues and achieve the best results.

Color Variations

Please note that slight color variations (10–15%) may occur between digital screens, inkjet proofs, and offset printing due to differences in machines, paper, and ink. If color accuracy is critical, we recommend using spot colors or requesting a dedicated press run.

Safe Zone

Keep all important text and logos at least 5 mm inside the trim line to prevent them from being accidentally cut off during trimming. For booklets or folded brochures, leave 20 mm or more.

Frames & Borders

Avoid using thin frames or borders close to the trim edge, as even slight cutting tolerances may cause them to look uneven. If you must use a border, make it at least 3–4 mm wide.

Black Text & Backgrounds

For small black text or fine lines, use 100% K (single black) to ensure sharp results. For large black areas or backgrounds, use rich black (C60 M40 Y40 K100) for deeper, more consistent coverage.

📌 These design tips are recommendations to help you prepare better artwork. Following them reduces the risk of print issues and ensures your design looks as intended.

La Lunar Printing Inc – 专业设计意见

以下建议能帮助您避免常见的印刷问题，确保最佳成品效果。

色差

由于印刷机、纸张和油墨的差异，印刷成品与屏幕或数码打样之间可能存在 10–15% 的色差。若您对色彩要求严格，建议使用专色或选择专版印刷。

文字安全区

请将重要文字和 LOGO 保持在 裁切线内至少 5 mm，以避免裁切时被切掉。对于折页或画册，建议安全区距离边缘 20 mm 以上。

外框设计

请避免在成品边缘设计细边框，因为裁切存在微小误差，会造成边框不均匀。如必须使用，请将边框宽度设为 3–4 mm 以上。

黑色文字与底色

小字或细线条请使用 单黑 (C=0, M=0, Y=0, K=100)，以确保清晰锐利。大面积黑色底色或背景建议使用 四色黑 (C60 M40 Y40 K100)，印刷效果更饱满均匀。

📌 以上设计意见旨在帮助您优化文件准备，减少印刷风险，确保您的设计得到理想呈现。